Fanttik Adds 7 New Automotive and DIY Tools

Fanttik is expanding its automotive and DIY catalog with seven new tools spanning road safety, emergency equipment, woodworking, precision finishing, cleanup, and measurement. The lineup is led by the Luma K10 Apex dual-channel dash cam and O11 Pro cordless circular saw, but the broader release also includes the Beyond 10 Apex, X11 Pro+, Pix 3 Master, B11 Mix Pro, and Neo A11 Pro. Rather than sharing a common technology platform, these products address different jobs while following the company’s focus on relatively compact, portable hardware.

Luma K10 Apex Brings 4K and AI Processing to the Road

The Luma K10 Apex is the most electronics-heavy product in the new lineup. Its 4K front camera uses a Sony STARVIS 2 IMX678 sensor, paired with a 2K rear camera for dual-channel recording. Fanttik also combines an AI NPU with an image signal processor to adapt image quality to changing driving and lighting conditions.

Getting recordings off a dash cam can be nearly as important as capturing them. The K10 Apex supports 5.8GHz Wi-Fi 6, with claimed wireless 4K download speeds exceeding 20 MB/s through its companion app. Drivers can also interact with the camera through a 2.8-inch IPS touchscreen or physical smart control dial. GPS recording adds location-related data to its road-recording capabilities.

Beyond 10 Apex and X11 Pro+ Target Roadside Problems

The Beyond 10 Apex takes the multi-tool approach to roadside equipment. Its 1.44-pound body combines a jump starter, tire inflator, power bank, and LED flashlight. Fanttik says it can jump-start gasoline engines up to 7.0 liters or diesel engines up to 5.0 liters, while its inflator can take an R15 tire from 28 to 33 PSI in one minute.

The X11 Pro+ is more specialized around inflation speed. It offers a maximum pressure of 150 PSI and Fanttik claims its Jet-Inflate system can top off an R15 tire in 39 seconds. That makes it relevant beyond cars as well, with motorcycles and bicycles among the stated applications.

O11 Pro and Pix 3 Master Cover Cutting and Finishing

For home projects, the O11 Pro is a compact 3-3/8-inch cordless circular saw weighing 2.31 pounds and measuring 10.75 inches long. Its 4,500 RPM brushless motor provides up to one inch of cutting depth. The compact dimensions should make it easier to maneuver than a full-size circular saw when working in restricted areas, although its one-inch cutting capacity naturally defines the scale of material it can handle. Fanttik claims its CellCore battery can complete more than 100 cuts through 1×8-inch lumber per charge.

The Pix 3 Master moves to much smaller work. This pen-style electric detail sander is aimed at 3D prints, models, crafts, grooves, and other areas where a conventional sander would be awkward. Its brushless motor operates at up to 6,000 SPM, while a ring LED provides illumination close to the sanding point.

B11 Mix Pro and Neo A11 Pro Round Out the Workshop

Cleanup is handled by the B11 Mix Pro, which uses a 160W brushless motor capable of up to 130,000 RPM and a claimed 70 m/s air speed. It is intended for blowing dust and debris from difficult spaces, but an axial fan attachment adds cooling functionality, while the tool can also inflate items such as pool floats.

The Neo A11 Pro takes care of measurement with a 165-foot laser range and claimed accuracy of +/-1/16 inch. Its 2.4-inch IPS touchscreen supports single, continuous, area, and volume measurements, complemented by an angle sensor and universal bubble level. Up to 30 measurement groups can be stored, which could be useful when collecting dimensions across a larger DIY or renovation job.

The Luma K10 Apex with an OBD-II hardwire kit is scheduled for availability through TikTok Shop and the Fanttik official website in mid-September 2026, while the 12V car charger kit version is planned for Amazon U.S. in October. The other products are listed as available now through Amazon U.S. and the company’s website. Pricing was not specified in the announcement.