A good stand can make a world of difference to the audio quality that you capture from your microphone. For live broadcasters, gamers, podcasters, musicians or anyone else looking to record or stream audio while sitting down – the Tonor T20 microphone stand should fit the bill.
If you want to know what makes this stand so different and how it stacks up, just keep on reading.
About the Tonor T20 Microphone Stand
The Tonor T20 is a microphone stand that mounts directly onto your desk using a clamp. It has a boom arm that is split into two sections to reposition your mic so that it is closer to your voice.
In terms of its range, the lower arm can rotate 360-degrees horizontally, while the upper arm extends vertically up to 180-degrees. The threaded end that connects to the microphone clip can similarly pivot 270-degrees to position the mic up or down.
Installing and setting up the Tonor T20 is relatively straightforward. After the base is clamped into place, the arm can be attached and the microphone placed into the clip. All that remains once that is done is to adjust the arm and mic so that it ends up where you want it to be.
Advantages of the Tonor T20 Microphone Stand
Compared to other microphone stands, the Tonor T20 really has a lot going for it. Some of its main advantages are:
Equipped with a pop filter to help eliminate popping sounds in your audio recording.
Excellent bearing capacity that can take on loads up to 4lbs or 1.8kg – which is enough even for heavy mics.
Compatible with most microphones that are currently on the market.
Improved desk clamp that is more stable and has a convenient earphone hook.
Cost-effective price tag that will deliver excellent performance without breaking the bank.
To sum it up, the Tonor T20 is generally a capable and reliable microphone stand that will get the job done.
Disadvantages of the Tonor T20 Microphone Stand
Although the Tonor T20 stand has a lot going for it, there are some areas where it does fall a little short. Its main disadvantages are:
Designed with an external spring construction that can result in handling noise if it is moved while recording.
No lock or fastener for the lower arm, so it could be accidentally moved mid-recording.
Limited arm length that may be a problem on wide desks if you intend to clamp it at the back.
All in all these disadvantages are relatively minor, but it still is important that you take them into consideration.
Overall the Tonor T20 microphone stand that is definitely worth every penny. It is solid yet flexible, and should be able to be used with your existing microphone.
As far as a desktop boom arm microphone stand goes, there is very little that is wrong with it. While it does have a few shortcomings, now that you are aware of them you can judge for yourself whether they’ll make a difference in your final decision.